Decorative and Facade Lighting Application
Decorative and Facade Lighting
Hotel / Resort Exterior
9 Lighting Types
81 Compatible Fixtures
Suitable Lighting Types for Hotel / Resort Exterior
Click any lighting category below to view specific fixtures and models
All Lighting Products for Hotel / Resort Exterior (81 available)
LD-11625-LED Bollard Light
LED Bollard Light
LD-11625-LED Bollard Light
- Die-cast aluminium body provides high hardness and very good durability
- Adopting high-power SMD 2835 LED chip as light source. Energy-saving, environment protecting and long life
- Internal scrub reflective light columns, the refraction effect is better
- IP65 waterproof, use in all weather conditions
- Installation easy and safe
- Estimated durability 10+ years.
| Light Source: | Bridgelux LED |
| Power: | 5W/9W/12W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 90° |
| Material: | Die-cast aluminium |
| Finishing Color: | Grey, Black |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11626-LED Bollard Light
LED Bollard Light
LD-11626-LED Bollard Light
- High quality aluminium body provides very good durability and heat dissipation
- High-efficiency PMMA lens
- Clear toughened glass
- IP65 waterproof, use in all weather conditions
- Installation easy and safe
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 2x5W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 90° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11602-LED Inground Light
LED Inground Light
LD-11602-LED Inground Light
- High quality stainless steel body provides very good durability and make them rust proof
- High quality LED Chip
- IP67 waterproof, use in all weather conditions
- Small size can do a variety of lighting design
- Lower thermal output
- Environment friendly
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 1W/3W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC12/24V |
| Beam Angle: | 10°,15°,30°,45°,60°,90° |
| Material: | SS 304/316 Optional |
| Finishing Color: | Stainless Steel |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11601-LED Inground Light
LED Inground Light
LD-11601-LED Inground Light
- High quality stainless steel body provides very good durability
- High quality LED Chip
- IP67 waterproof, use in all weather conditions
- Environment friendly
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 0.5W/1W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC12/24V |
| Beam Angle: | 10°,15°,30°,45°,60°,90° |
| Material: | SS 304/316 Optional |
| Finishing Color: | Stainless steel |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11609-LED Spike Light
LED Spike Light
LD-11609-LED Spike Light
- High quality die-cast aluminium body provides very good durability and heat dissipation
- Spike material : Die-cast aluminium / Thermoplastic (POM)
- 3030 COB LED chips,high efficiency,energy saving and high color rendering
- IP65 waterproof, use in all weather conditions
- Easy installation
- Black, grey, silver, white multiple color options
- Estimated durability 10+ years
| Light Source: | Bridgelux COB LED |
| Power: | 5W/7W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 36° |
| Material: | Die-cast aluminium |
| Finishing Color: | Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Spike mounted/Base mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11608-LED Spike Light
LED Spike Light
LD-11608-LED Spike Light
- High quality die-cast aluminium body provides very good durability and heat dissipation
- Spike material : Die-cast aluminium / Thermoplastic (POM)
- 3030 COB LED chips,high efficiency,energy saving and high color rendering
- IP65 waterproof, use in all weather conditions
- Easy installation
- Black, grey, silver, white multiple color options
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 3W/5W/7W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 30°,60° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey, Silver, White |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Spike mounted/Bracket mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11616-LED Surface Wall Light
LED Surface Wall Light
LD-11616-LED Surface Wall Light
- High quality Die-cast aluminium body provides very good durability and heat dissipation
- Adopting high-power COB LED as light source. Energy-saving, environment protecting and long life
- IP65 waterproof, use in all weather conditions
- Energy saving up to 80%
- Working environment -20°C-55°C, suitable for unusual climate
- Estimated durability 10+ years
| Light Source: | Bridgelux COB LED chip |
| Power: | 2x5W/2x10W/2x15W/2x20W/2x24W/2x30W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 15°,24°,36°,60° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11613-LED Recessed Wall Light
LED Recessed Wall Light
LD-11613-LED Recessed Wall Light
- High quality die-cast aluminium body provides very good durability and heat dissipation
- 2835 SMD LED chips, high efficiency, energy saving and high color rendering
- IP65 waterproof, use in all weather conditions
- Easy installation
- Long time working
- Estimated durability 10+ years
| Light Source: | Bridgelux SMD LED |
| Power: | 10W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 30° |
| Material: | Die-cast aluminium |
| Finishing Color: | Grey, Black |
| Driver: | Standard |
| IP Rating: | IP54/IP65 |
| Mounting: | Recessed Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11612-LED Recessed Wall Light
LED Recessed Wall Light
LD-11612-LED Recessed Wall Light
- High quality die-cast aluminium body provides very good durability and heat dissipation
- 2835 SMD LED chips, high efficiency, energy saving and high color rendering
- IP65 waterproof, use in all weather conditions
- Life Span Up to 50,000 Hours
- Working environment -20°C-55°C, suitable for unusual climate
- Motion sensor(optional)
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 3W/5W/7W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | AC85-277V |
| Beam Angle: | 30° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65/IP54 |
| Mounting: | Recessed Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11627-LED Wall Washer
LED Wall Washer
LD-11627-LED Wall Washer
- Aluminium body provides high hardness and very good durability
- Adopting high-power SMD3030 LED as light source. Energy-saving, environment protecting and long life
- IP65 waterproof, use in all weather conditions
- Installation easy and safe
- Estimated durability 10+ years
| Light Source: | Bridgelux LED |
| Power: | 18W/24W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V |
| Beam Angle: | 15°,30°,45°,60° |
| Material: | Aluminium |
| Finishing Color: | Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11628-LED Wall Washer
LED Wall Washer
LD-11628-LED Wall Washer
- Aluminium body provides high hardness and very good durability
- Antiglare louver
- Adopting high-power SMD3030 LED as light source. Energy-saving, environment protecting and long life
- IP65 waterproof, use in all weather conditions
- Installation easy and safe
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 24W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V |
| Beam Angle: | 15°,30°,45°,60° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11603-LED Inground Light
LED Inground Light
LD-11603-LED Inground Light
- Material: Stainless steel+ Aluminium+ Tempered glass
- High quality LED Chip
- IP67 waterproof, use in all weather conditions
- Environment friendly
- Anti-glare honeycomb optional accessory
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 3W/5W/6W/9W/12W/18W/24W/36W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 15°,30°,45°,60°,90° |
| Material: | SS 304/316 Optional+Aluminium |
| Finishing Color: | Stainless steel front cover |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11604-LED Inground Light
LED Inground Light
LD-11604-LED Inground Light
- Material: Stainless steel+ Aluminium +Tempered glass
- High quality LED Chip
- IP67 waterproof, use in all weather conditions
- Environment friendly
- Anti-glare honeycomb optional accessory
- Estimated durability 10+ years
| Light Source: | CREE 3535 LED chip |
| Power: | 3x2W/ 9x2W/ 12x2W/ 18x2W/ 24x2W/ 36x2W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 15°,30°,45°,60°,90° |
| Material: | SS 304/316 Optional+ Aluminium |
| Finishing Color: | Stainless Steel front cover |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11605-LED Inground Light
LED Inground Light
LD-11605-LED Inground Light
- Material: Stainless steel+ Aluminium+ Tempered glass
- High quality LED Chip
- 15° adjustable beam angle
- IP67 waterproof, use in all weather conditions
- Environment friendly
- Anti-glare honeycomb optional accessory
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 10W/15W/ 20W/25W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 36° |
| Material: | SS 304/316 Optional+ Aluminium |
| Finishing Color: | Stainless steel front cover |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11606-LED Inground Light
LED Inground Light
LD-11606-LED Inground Light
- High quality Die-cast aluminium body provides very good durability and heat dissipation
- Top brand LED is used to ensure its long lifetime and efficiency
- IP67 waterproof, use in all weather conditions
- Light fitting is sleek and simple
- Easy installation
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 1W/3W /5W/ 7W/ 9W/ 12W/ 15W/ 18W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 10°,15°,30°,45°,60°,90° |
| Material: | SS 304/316 Optional, Die-cast aluminium |
| Finishing Color: | Black |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11611-LED Spike Light
LED Spike Light
LD-11611-LED Spike Light
- High quality die-cast aluminium body provides very good durability and heat dissipation
- Spike material : Die-cast aluminium / Thermoplastic (POM)
- 3030 COB LED chips, high efficiency, energy saving and high color rendering
- IP65 waterproof, use in all weather conditions
- Easy installation.
- Black, grey, silver, white multiple color options
- Estimated durability 10+ years
| Light Source: | Bridgelux COB LED |
| Power: | 12W/ 15W/ 18W/ 20W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 30° |
| Material: | Die-cast aluminium |
| Finishing Color: | Grey, Black, Silver, White |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Spike mounted/Base mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11615-LED Surface Wall Light
LED Surface Wall Light
LD-11615-LED Surface Wall Light
- High quality die-cast aluminium body provides very good durability and heat dissipation
- COB LED chips,high efficiency,energy saving and high color rendering
- IP65 waterproof, use in all weather conditions
- No mercury or other hazardous materials
- Working environment -20°C~55°C, suitable for unusual climate
- Estimated durability 10+ years
| Light Source: | Bridgelux COB LED |
| Power: | 5W/7W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 90° |
| Material: | Die-cast aluminium |
| Finishing Color: | Grey, Black, white |
| Driver: | Standard |
| IP Rating: | IP54/IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11623-LED Bollard Light
LED Bollard Light
LD-11623-LED Bollard Light
- Simple and modern design
- Die-cast aluminium body provides high hardness and very good durability.
- Adopting high-power COB LED as light source. Energy-saving, environment protecting and long life
- IP65 waterproof, use in all weather conditions
- Installation easy and safe
- Estimated durability 10+ years
| Light Source: | Bridgelux LED |
| Power: | 7W/10W/15W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | DC24V/AC85-265V |
| Beam Angle: | 270° |
| Material: | Die-cast aluminium |
| Finishing Color: | Grey, Black |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11624-LED Bollard Light
LED Bollard Light
LD-11624-LED Bollard Light
- Housing made of Die-cast aluminum it provides good heat dissipation and strong structure
- PC diffuser
- IP65 waterproof, use in all weather conditions
- Energy Savings of as Much as 90% vs. Traditional Lighting
- Instant start, no noise, no flickering
- Installation easy and safe
- Estimated durability 10+ years
| Light Source: | Bridgelux LED chip |
| Power: | 10+7W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 30° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8501-LED Bollard Light
LED Bollard Light
LD-8501-LED Bollard Light
- Durable die-cast aluminium body
- More stable quality
- IP65 weatherproof
- Super bright energy saving chip
- Low power consumption and Low heat dissipation
- Easy installation
- Estimated durability 10+ years
| Light Source: | EPISTAR COB |
| Power: | 10W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 60° |
| Material: | Die-cast aluminium |
| Finishing Color: | Grey and Black |
| Driver: | Isolated LED driver |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-5201-E27-LED Wall Light
LED Surface Wall Light
LD-5201-E27-LED Wall Light
- High quality die-cast aluminium body and tempered glass diffuser
- IP54 housing for protection against water spray and dust ingress
- Working environment -15°C~+50°C, suitable for unusual climate
- Long time working, produce low heat
- Estimated durability 10+ years
| Light Source: | E27 |
| Power: | Max.2x60W E27 |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/6000K |
| Input Voltage: | AC100-240V |
| Beam Angle: | 110° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, White and Grey |
| Driver: | Standard |
| IP Rating: | IP54 |
| Mounting: | Wall mounting |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8503-LED Wall Light
LED Recessed Wall Light
LD-8503-LED Wall Light
- Outdoor indoor waterproof IP65 wall light
- Made of aluminum surface treated with powder coating, corrosion resistance
- Matte texture, smooth and delicate , corrosive and durable
- Multi color Optional: White, Black, Silver, Gray. Easy installation, embedded installation
- Energy saving and environmental protection
- Constant current driver
- Estimated durability 10+ years
| Light Source: | CREE LED chip |
| Power: | 3W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 38° |
| Material: | Aluminium |
| Finishing Color: | Black, White, Silver and Gray |
| Driver: | Constant current driver |
| IP Rating: | IP20,IP65 |
| Mounting: | Recessed Wall |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8505-LED Wall Light
LED Recessed Wall Light
LD-8505-LED Wall Light
- LED wall light recessed stair light indoor decoration step light ladder stairway night light corridor wall light
- Elegant light design, soft light, glare-free, wider and more uniform lighting spot
- Super bright energy saving chip
- Multi color Optional: White, Black, Silver and Gold
- Easy installation
- Ordinary version (controlled by ordinary switch), human body sensation version
- Estimated durability 10+ years
| Light Source: | LED chip |
| Power: | 2W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6000K |
| Input Voltage: | AC220V |
| Beam Angle: | 60° |
| Material: | ABS |
| Finishing Color: | Black, White, Silver and Golden |
| Driver: | Standard |
| IP Rating: | IP20 |
| Mounting: | Recessed Wall |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8506-LED Wall Light
LED Recessed Wall Light
LD-8506-LED Wall Light
- LED wall light recessed stair light indoor decoration step light ladder stairway night light corridor wall light
- Elegant light design, soft light, glare-free, wider and more uniform lighting spot
- Super bright energy saving chip
- Multi color Optional: White, Black, Silver and Gold
- Easy installation
- Ordinary version(controlled by ordinary switch), human body sensation version
- Estimated durability 10+ years
| Light Source: | LED chip |
| Power: | 1W/1.5W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6000K |
| Input Voltage: | AC220V |
| Beam Angle: | 60° |
| Material: | ABS |
| Finishing Color: | Black, White, Silver and Golden |
| Driver: | Standard |
| IP Rating: | IP20 |
| Mounting: | Recessed Wall |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8509-LED Wall Light
LED Surface Wall Light
LD-8509-LED Wall Light
- Elegant Design, up-down wall light
- Adjustable beam angle
- More stable quality
- IP65 weatherproof
- Super bright energy saving chip
- Low power consumption and Low heat dissipation
- Easy installation
- Estimated durability 10+ years
| Light Source: | EPISTAR LED chip |
| Power: | 2x3W/2x6W/2x10W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 15°,30°,60° |
| Material: | Aluminium Alloy |
| Finishing Color: | Black, White and Grey |
| Driver: | In-built |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8513-LED Wall Light
LED Surface Wall Light
LD-8513-LED Wall Light
- Elegant design, up-down wall light
- More stable quality
- IP65 weatherproof
- Super bright energy saving chip
- Low power consumption and Low heat dissipation
- Easy installation
- Estimated durability 10+ years
| Light Source: | EPISTAR LED chip |
| Power: | 12W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 60° |
| Material: | Aluminium Alloy |
| Finishing Color: | Black, White and Grey |
| Driver: | Isolated LED Driver |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8514-LED Wall Light
LED Surface Wall Light
LD-8514-LED Wall Light
- Elegant Design,down wall light
- More stable quality
- IP65 weatherproof
- Super bright energy saving chip
- Low power consumption and Low heat dissipation
- Easy installation
- Estimated durability 10+ years
| Light Source: | EPISTAR LED chip |
| Power: | 6W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 700K/3000K/4000K/5000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 60° |
| Material: | Aluminium Alloy |
| Finishing Color: | Black, White and Grey |
| Driver: | Isolated LED Driver |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8516-LED Wall Light
LED Surface Wall Light
LD-8516-LED Wall Light
- Elegant Design,up-down wall light
- More stable quality
- IP65 weatherproof
- Super bright energy saving chip
- Low power consumption and Low heat dissipation
- Easy installation.
- Estimated durability 10+ years
| Light Source: | COB chip |
| Power: | 4x1W /6x1W /8x1W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 30° |
| Material: | Aluminium Alloy |
| Finishing Color: | Black and Grey |
| Driver: | In-built Driver |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8517-LED Wall Light
LED Surface Wall Light
LD-8517-LED Wall Light
- Unique special lighting effects , could meet different building’s space requirement for lighting
- More stable quality
- IP65 weatherproof
- Low power consumption and Low heat dissipation
- Easy installation
- Super bright energy saving chip
- Estimated durability 10+ years
| Light Source: | CREE LED chip |
| Power: | 4x3W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 360° |
| Material: | Aluminium |
| Finishing Color: | Black, Grey |
| Driver: | In-built |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-5602-Led Strip Light
LED Strip Light
LD-5602-Led Strip Light
- High efficient 2835 LED tripple rows strip light
- High Lumens Output
- Available in 2700K,3000K, 4000K,6000K
- Color rendering index up to 90Ra
- Up to 30mm Wide flexible tape for Specific space or Aluminum profile
- IP65 waterproof protection
- Long lifespan >50,000 hours
| Light Source: | SMD2835 LED chip |
| Power: | 20W/M/30W/M |
| Lumen Efficacy: | 90-100lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | DC12/24V |
| Beam Angle: | 120° |
| Material: | Silicone |
| Finishing Color: | - |
| Driver: | Standard |
| IP Rating: | IP20/IP65 |
| Mounting: | - |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-5603-Led Strip Light
LED Strip Light
LD-5603-Led Strip Light
- High efficient 2835 LED double rows
- Available in 2700K,3000K, 4000K,6000K,R,G,B
- Color rendering index up to 80Ra
- AC 220V input directly, no rectifier and power supply
- IP66 Hollow extrusion or IP67 solid extrusion waterproof
- 3M self-adhesive backing for easy installation
| Light Source: | SMD2835 LED chip |
| Power: | 20W/M |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/R/G/B |
| Input Voltage: | AC220V |
| Beam Angle: | 120° |
| Material: | Silicone |
| Finishing Color: | N/A |
| Driver: | Standard |
| IP Rating: | IP66/IP67 |
| Mounting: | N/A |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-5604-Led Strip Light
LED Strip Light
LD-5604-Led Strip Light
- High efficient 2835 LED Single row
- Available in 2700K,3000K, 4000K,6000K,R,G,B
- Color rendering index up to 80Ra
- AC 220V input directly, no rectifier and power supply
- IP66 Hollow extrusion or IP67 solid extrusion waterproof
- 3M self-adhesive backing for easy installation
| Light Source: | Osram SMD2835 LED chip |
| Power: | 15W/M |
| Lumen Efficacy: | 90-100lm/W |
| CCT: | 2700K/3000K/4000K/6000K/R/G/B |
| Input Voltage: | AC220V |
| Beam Angle: | 120° |
| Material: | Silicone |
| Finishing Color: | - |
| Driver: | Standard |
| IP Rating: | IP66/IP67 |
| Mounting: | - |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11901-LED Under Water Light
LED Under Water Light
LD-11901-LED Under Water Light
- High quality PC housing provides good anti-corrosion
- Fully protected by resin, IP68 waterproof
- High quality SMD2835 LED, high brightness and uniform light output
- Eco-friendly with Low Energy Consumption
- Easy installation
- Estimated durability 10+ years
| Light Source: | SMD 2835 |
| Power: | 18W/25W/35W/42W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGB |
| Input Voltage: | AC12V |
| Beam Angle: | 120° |
| Material: | PC+ABS |
| Finishing Color: | White |
| Driver: | Standard |
| IP Rating: | IP68 |
| Mounting: | Wall Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11902-LED Under Water Light
LED Under Water Light
LD-11902-LED Under Water Light
- High quality PC housing provides good anti-corrosion
- 7.5mm ultra thin design
- Protected by epoxy resin,100% waterproof
- High quality SMD2835 LED, high brightness, lumen efficiency up to 100-110lm/W
- Eco-friendly with Low Energy Consumption
- Easy installation
- Estimated durability 10+ years
| Light Source: | SMD 2835 |
| Power: | 6W/10W/18W/25W/35W/42W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5000K/RGB/RGBW |
| Input Voltage: | DC12V |
| Beam Angle: | 120° |
| Material: | 316 Stainless Steel+ PC |
| Finishing Color: | White |
| Driver: | Standard |
| IP Rating: | IP68 |
| Mounting: | Wall mounting |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20601-LED Decorative Pole Light
LED Decorative Pole Light
LD-20601-LED Decorative Pole Light
- Die-cast aluminium body with tempered glass and minimum 2mmthickness based on pole height
- Equipped with lumileds LEDs and inventronic driver
- Class 1 electrical protection, operating at 110-240V/50Hz
- Rated IP65 indicating high protection against dust and water jets
- Control System: On/Off / Dali.
- Finish: Electrostatic Powder Coating as per given RAL.
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc.
| Light Source: | Lumileds LED |
| Power: | 30W/50W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 90° |
| Material: | Die-cast aluminium |
| Finishing Color: | Grey, Black (Customized RAL Color) |
| Driver: | Inventronic |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20602-LED Decorative Pole Light
LED Decorative Pole Light
LD-20602-LED Decorative Pole Light
- Die-cast aluminium body with tempered glass and minimum 2mm thickness based on pole height
- Equipped with a 25W CREE LED and Inventronic driver
- Class I, suitable for 110–240V / 50Hz input
- Rated IP65 for dust and water resistance
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc
| Light Source: | CREE LED chip |
| Power: | 25W/45W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 180° |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Inventronic |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20603-LED Decorative Pole Light
LED Decorative Pole Light
LD-20603-LED Decorative Pole Light
- Constructed with an extruded aluminium body
- Fitted with CREE LED and an Inventronic driver
- Class I, compatible with 110–240V / 50Hz input
- Provides IP65-level protection
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/ CRI/Beam Angle/Diffuser etc.
| Light Source: | CREE LED chip |
| Power: | 30W/45W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Inventronic |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20604-LED Decorative Pole Light
LED Decorative Pole Light
LD-20604-LED Decorative Pole Light
- Die-cast aluminium body with tempered glass and minimum 2mm thickness based on pole height
- The system is Class I rated and operates on an input voltage range of 110- 240V at 50Hz
- The product is protected against dust and water ingress with an IP65 rating
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc
| Light Source: | Lumileds LED |
| Power: | 30W/40W/60W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 110° |
| Material: | Aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Inventronic |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20610-LED Decorative Pole Light
LED Decorative Pole Light
LD-20610-LED Decorative Pole Light
- Die-cast aluminium body with tempered glass and minimum 2mm-thickness based on pole height
- The system is Class I rated and operates on an input voltage range of 110-240V at 50Hz
- The product is protected against dust and water ingress with an IP65 rating
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc
| Light Source: | Lumileds LED |
| Power: | 30W/45W/60W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Inventronic |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20609-LED Decorative Pole Light
LED Decorative Pole Light
LD-20609-LED Decorative Pole Light
- The fixture is constructed with a die-cast aluminium housing and a spinning aluminium cover
- The product is rated Class I and accepts an input voltage of 110-240V at 50Hz
- It features an IP65 ingress protection rating, ensuring robust resistance to dust and water
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc
| Light Source: | Lumileds LED |
| Power: | 25W/35W/60W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Inventronic |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20605-LED Decorative Pole Light
LED Decorative Pole Light
LD-20605-LED Decorative Pole Light
- The fixture is built with a die-cast aluminium housing and utilizes a tempered clear glass
- The internal reflector system is constructed from aluminium sheet, which is powder-coated white to ensure high reflectivity
- It is rated as Class I for electrical safety and operates on an input voltage range of 110-240V at 50Hz
- The product carries an IP65 rating, signifying protection against dust and jets of water
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc
| Light Source: | Lumileds LED |
| Power: | 30W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Inventronic |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20606-LED Decorative Pole Light
LED Decorative Pole Light
LD-20606-LED Decorative Pole Light
- The fixture is built with a die-cast aluminium housing and utilizes a tempered clear glass lens
- The internal reflector system is constructed from aluminium sheet, which is powder-coated white to ensure high reflectivity
- It is rated as Class I for electrical safety and operates on an input voltage range of 110-240V at 50Hz
- The product carries an IP65 rating, signifying protection against dust and jets of water
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc
| Light Source: | CREE COB |
| Power: | 30W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Inventronic |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20607-LED Decorative Pole Light
LED Decorative Pole Light
LD-20607-LED Decorative Pole Light
- Equipped with a CREE COB LED
- Constructed from extruded aluminium
- Class I electrical protection; operable with 110-240VAC power at 50Hz
- With an IP65 ingress protection rating, the unit is fully protected against dust and strong water jets
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc
| Light Source: | CREE COB |
| Power: | 20W/40W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20608-LED Decorative Pole Light
LED Decorative Pole Light
LD-20608-LED Decorative Pole Light
- An extruded aluminium housing and an opal PC diffuser, providing 360-degree light distribution
- It is equipped with four T8 FSL LED lamps, each consuming 16 watts of power
- Electrical insulation is Class I, operating on a standard 220V, 50Hz power supply
- An IP65 rating, indicating high resistance to dust and water ingress
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/Diffuser etc
| Light Source: | Osram LED |
| Power: | 2*16W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 90° |
| Material: | Aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mount |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8504-LED Recessed Wall Light
LED Recessed Wall Light
LD-8504-LED Recessed Wall Light
- Durable aluminium alloy body
- More stable quality
- IP65 weatherproof
- Super bright energy saving chip
- Low power consumption and Low heat dissipation
- Easy installation
- Estimated durability 10+ years
| Light Source: | Epistar COB chip |
| Power: | 3W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 120° |
| Material: | Aluminium Alloy |
| Finishing Color: | Grey, Black, Silver |
| Driver: | Isolated LED driver |
| IP Rating: | IP65 |
| Mounting: | Recessed Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11642-LED Step Light
LED Recessed Wall Light
LD-11642-LED Step Light
- The light fixture is constructed from high-quality die-cast aluminium, ensuring durability and long-lasting performance
- The fixture is equipped with a 12W SMD2835 LED, providing efficient and reliable illumination
- With an IP54 rating, the light is protected against dust and water splashes, suitable for both indoor and outdoor use
- Estimated durability 10+ years
| Light Source: | Bridgelux LED |
| Power: | 12W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 110° |
| Material: | Die-cast Aluminium |
| Finishing Color: | Black / Gray |
| Driver: | Standard |
| IP Rating: | IP54 |
| Mounting: | Recessed Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11642-LED Wall Light
LED Surface Wall Light
LD-11642-LED Wall Light
- Constructed from high-quality aluminium, providing excellent heat dissipation and durability
- Supports a wide AC85–265V input voltage, ensuring compatibility with various power systems
- Rated IP65, providing strong protection against dust and water, ideal for outdoor environments
- Estimated durability 10+ years
| Light Source: | CREE |
| Power: | 28W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 3° |
| Material: | Aluminium |
| Finishing Color: | Black/ Gray |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Surface Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8101-GU10-LED Inground Light
LED Inground Light
LD-8101-GU10-LED Inground Light
- The light’s body is made of pressure die-cast aluminium for durability and strength
- The cover is made of 316 stainless steel and tempered glass, giving it a robust finish that is corrosion-resistant and can withstand harsh weather conditions
- The light is IP67 rated, making it waterproof and perfect for outdoor use
- Estimated durability 10+ years
| Light Source: | GU10 Lamp |
| Power: | Max.50W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC200-240V |
| Beam Angle: | N/A |
| Material: | Die casting Aluminium+316 SS |
| Finishing Color: | Black and SS |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed mounting |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-8104-LED Inground Light
LED Inground Light
LD-8104-LED Inground Light
- The light’s body is made of pressure die-cast aluminium for durability and strength
- The cover is made of 316 stainless steel and tempered glass, giving it a robust finish that is corrosion-resistant and can withstand harsh weather conditions
- The light is IP67 rated, making it waterproof and perfect for outdoor use
- Estimated durability 10+ years
| Light Source: | COB/SMD LED Chip |
| Power: | 3x1W/3x2W/5W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/RGBW |
| Input Voltage: | AC200-240V/24VDC |
| Beam Angle: | 15°/45°/60°/90°/120° |
| Material: | Die-cast ADC#12 Aluminium+316 SS |
| Finishing Color: | Black and SS |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed Mounting |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11635-LED Underground Light
LED Inground Light
LD-11635-LED Underground Light
- The light is made of high-quality 304# stainless steel for durability and corrosion resistance
- It operates on a safe low-voltage input of DC24V, making it ideal for outdoor and landscape applications
- The beam angle of 30 degrees provides a controlled and focused lighting effect
- It has an IP67 rating, making it suitable for outdoor and wet environments
- The two-sided emission design provides balanced and decorative lighting effects on both sides
- Estimated durability 10+ years
| Light Source: | Bridgelux SMD 3030 |
| Power: | 3W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | DC24V |
| Beam Angle: | N/A |
| Material: | SS 304/316 Optional |
| Finishing Color: | N/A |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11636-LED Underground Light
LED Inground Light
LD-11636-LED Underground Light
- Made from durable stainless steel combined with aluminium, ensuring excellent corrosion resistance and long lifespan
- Operates on a wide AC85–265V input voltage, suitable for various installation environments
- Rated IP67, making it fully protected against dust and water, perfect for outdoor and in-ground applications
- Estimated durability 10+ years
| Light Source: | Bridgelux LED |
| Power: | 10W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 90° |
| Material: | SS 304/316 Optional + Aluminium |
| Finishing Color: | N/A |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11637-LED Underground Light
LED Inground Light
LD-11637-LED Underground Light
- Constructed from stainless steel combined with aluminium, ensuring durability and strong resistance to corrosion
- Designed to operate on a wide AC85–265V input voltage, making it suitable for various power conditions
- IP67 rated, offering excellent protection against dust and water, perfect for in-ground and landscape applications
- Estimated durability 10+ years
| Light Source: | Bridgelux SMD 3030 |
| Power: | 3x1W/36x1W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 30° |
| Material: | SS 304/316 Optional+ Aluminium |
| Finishing Color: | N/A |
| Driver: | Standard |
| IP Rating: | IP67 |
| Mounting: | Recessed Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-10202-14W/M-LED Neon Strip Light
LED Strip Light
LD-10202-14W/M-LED Neon Strip Light
- The high-performance flexible linear neon light is rated IP67, ensuring excellent protection against dust and water ingress
- It offers excellent heat dissipation, superior color consistency, and strong resistance to external factors, thanks to its fully encapsulated high-quality construction and the stable properties of silica material
- The product has been rigorously tested and delivers excellent resistance to salt, water, UV radiation, abrasion, and various chemicals, ensuring durability in harsh environments
- This LED neon light is perfectly suited for a wide range of indoor and outdoor applications, including wellness areas, gardens, landscaping, architectural lighting, marine use, and more
| Light Source: | EPISTAR SMD Chip |
| Power: | 14W/M |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K/R/G/B |
| Input Voltage: | DC24V |
| Beam Angle: | 120° |
| Material: | Silicone |
| Finishing Color: | N/A |
| Driver: | N/A |
| IP Rating: | IP67 |
| Mounting: | N/A |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-10203-24W/M-LED COB Strip Light
LED Strip Light
LD-10203-24W/M-LED COB Strip Light
- The product uses branded LED chips, delivering high brightness with low light decay and a long lifespan of over 50,000 hours
- All materials comply with RoHS standards, ensuring environmental safety and quality
- The design allows for easy installation and maintenance, with the ability to bend freely and featuring 3M adhesive tape on the backside for convenient mounting
- The light features a 180° beam angle, ensuring wide illumination coverage
| Light Source: | EPISTAR COB Chip |
| Power: | 24W/M |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | DC24V |
| Beam Angle: | 180° |
| Material: | Silicone |
| Finishing Color: | N/A |
| Driver: | N/A |
| IP Rating: | IP20/IP54/IP65/IP67 |
| Mounting: | N/A |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-10204-10W/M-LED COB Strip Light
LED Strip Light
LD-10204-10W/M-LED COB Strip Light
- This COB LED strip operates on AC110V/220V direct power, eliminating the need for an additional power supply
- It features a CRI >80 and high lumen output, ensuring good color rendering and brightness
- Designed with a double-layer circuit board, it provides more stable electrical performance
- Manufactured using lead-free (RoHS-compliant) technology, ensuring environmental safety and reliability
| Light Source: | EPISTAR COB Chip |
| Power: | 10W/M |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC110V/220V |
| Beam Angle: | 180° |
| Material: | PVC |
| Finishing Color: | N/A |
| Driver: | N/A |
| IP Rating: | IP67 |
| Mounting: | N/A |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-10205-LED Strip Light
LED Strip Light
LD-10205-LED Strip Light
- High efficient 5050 SMD LED Single and Double rows
- Available in 2700K,3000K, 4000K,6000K,R,G,B
- Color rendering index upto 80Ra
- Every 1 or 0.5 Meter cuttable without damaging the rest strips
- IP67 weather protection
| Light Source: | SMD 5050 LED chip |
| Power: | 10W/M/16W/M |
| Lumen Efficacy: | AC110-220V |
| CCT: | 2700K/3000K/4000K/6000K/R/G/B |
| Input Voltage: | AC110-220V |
| Beam Angle: | 120° |
| Material: | PVC |
| Finishing Color: | N/A |
| Driver: | N/A |
| IP Rating: | IP67 |
| Mounting: | N/A |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11639-LED Spike Light
LED Spike Light
LD-11639-LED Spike Light
- The fixture is constructed from high-quality die-casting aluminium, ensuring durability and excellent heat dissipation
- Spike material : Die-cast aluminium / Thermoplastic (POM)
- It operates on a wide input voltage range of AC85–265V, making it suitable for various electrical systems
- Rated IP65, the fixture is resistant to dust and water, making it ideal for outdoor use
- Estimated durability 10+ years
| Light Source: | Bridgelux LED |
| Power: | 7W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 24° |
| Material: | Die-cast Aluminium |
| Finishing Color: | Black/Gray/White |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Recessed Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-11640-LED Spike Light
LED Spike Light
LD-11640-LED Spike Light
- Built with robust die-casting aluminium housing, ensuring excellent strength, durability, and heat dissipation
- Spike material : Die-cast aluminium / Thermoplastic (POM)
- Compatible with a wide AC85–265V input voltage, suitable for various power systems
- Rated IP65, ensuring reliable protection against dust and water for outdoor applications
- Estimated durability 10+ years
| Light Source: | Bridgelux COB LED |
| Power: | 1x15W/1x20W/1x30W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/6000K |
| Input Voltage: | AC85-265V |
| Beam Angle: | 24°/36° |
| Material: | Die-Casting Aluminium |
| Finishing Color: | Black/Gray |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Spike Mounted/ Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20622-LED Bollard Light
LED Bollard Light
LD-20622-LED Bollard Light
- The light fixture is constructed with a durable die-casting aluminium housing and an extruded aluminium pole, ensuring strength and long-lasting performance
- It features an injection-molded PC diffuser, providing uniform light distribution and high impact resistance
- IP65 waterproof, use in all weather conditions
- This light is ideal for outdoor applications such as parks, public squares, streets, and building surroundings
- Estimated durability 10+ years
| Light Source: | Lumileds LED |
| Power: | 10W/20W/25W/30W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 180x360° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20623-LED Bollard Light
LED Bollard Light
LD-20623-LED Bollard Light
- Built with a die-casting aluminium housing and an extruded aluminum pole for enhanced durability and structural stability
- Equipped with an injection PC diffuser that ensures smooth, even light distribution with excellent resistance to impact
- IP65 waterproof, use in all weather conditions
- Perfectly suited for outdoor environments including parks, public squares, streets, and building exteriors
- Estimated durability 10+ years
| Light Source: | Lumileds LED |
| Power: | 10W/20W/25W/30W |
| Lumen Efficacy: | 100-1100lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 180x360° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20624-LED Bollard Light
LED Bollard Light
LD-20624-LED Bollard Light
- The light fixture is constructed with a durable die-casting aluminium housing and an extruded aluminium pole, ensuring strength and longlasting performance
- It features an injection-molded PC diffuser, providing uniform light distribution and high impact resistance
- IP65 waterproof, use in all weather conditions
- This light is ideal for outdoor applications such as parks, public squares, streets, and building surroundings
- Estimated durability 10+ years
| Light Source: | Lumileds LED |
| Power: | 10W/20W/30W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 180x360° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20625-LED Bollard Light
LED Bollard Light
LD-20625-LED Bollard Light
- Designed with a high-quality die-cast aluminium housing and an extruded aluminium pole for superior strength and corrosion resistance
- Comes with an injection-molded PC diffuser that delivers soft, uniform illumination while maintaining durability
- Suitable for a wide range of outdoor applications, including parks, squares, streets, and building surroundings
- Estimated durability 10+ years
| Light Source: | Lumileds 2835 |
| Power: | 10W/14W/20W/24W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 140x180° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20626-LED Bollard Light
LED Bollard Light
LD-20626-LED Bollard Light
- Constructed with a durable die-casting aluminium housing and an extruded aluminium pole, ensuring excellent strength and long-term reliability
- Fitted with tempered glass, providing high light transmission along with enhanced safety and durability
- Ideal for outdoor applications such as parks, public squares, streets, and building surroundings
- Estimated durability 10+ years
| Light Source: | CREE COB |
| Power: | 10W/15W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 29°/30° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20627-LED Bollard Light
LED Bollard Light
LD-20627-LED Bollard Light
- Durable die-cast aluminium housing with an extruded aluminium pole for enhanced strength and longevity
- Equipped with a double PMMA diffuser for improved light distribution and reduced glare
- Ideal for outdoor applications such as parks, public squares, streets, and building surroundings
- Estimated durability 10+ years
| Light Source: | Lumileds 2835 |
| Power: | 20W/30W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 90° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20628-LED Bollard Light
LED Bollard Light
LD-20628-LED Bollard Light
- Die-cast aluminium housing combined with an extruded aluminium pole for superior strength and durability
- Clear tempered glass for high durability and enhanced light clarity
- Suitable for outdoor applications such as parks, public squares, streets, and building surroundings
- Estimated durability 10+ years
| Light Source: | CREE COB |
| Power: | 10W/15W/20W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 131.8° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP54 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20630-LED Bollard Light
LED Bollard Light
LD-20630-LED Bollard Light
- Die-cast aluminium housing combined with a durable extruded aluminium pole for enhanced strength and corrosion resistance
- Injection-molded polycarbonate (PC) diffuser ensuring uniform light distribution and high impact resistance
- Ideal for outdoor applications, including parks, public squares, streets, and building surroundings
- Estimated durability 10+ years
| Light Source: | LED |
| Power: | 10W |
| Lumen Efficacy: | N/A |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 115° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20632-LED Bollard Light
LED Bollard Light
LD-20632-LED Bollard Light
- Die-cast aluminium housing combined with a durable extruded aluminium pole for enhanced strength and corrosion resistance
- Tempered glass diffuser providing high light transmission and enhanced brightness
- Designed for outdoor applications, including parks, public squares, streets, and building exteriors
- Estimated durability 10+ years
| Light Source: | CREE COB LED |
| Power: | 10W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 180° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP54 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20633-LED Bollard Light
LED Bollard Light
LD-20633-LED Bollard Light
- Die-cast aluminium housing with a robust extruded aluminium pole, ensuring durability and excellent corrosion resistance
- Injection-molded PMMA diffuser delivering high light clarity, uniform distribution, and UV resistance
- Ideal for outdoor applications, including parks, public squares, streets, and building surroundings
- Estimated durability 10+ years
| Light Source: | Lumileds 3030 |
| Power: | 10W/20W/30W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 180x360° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20634-LED Bollard Light
LED Bollard Light
LD-20634-LED Bollard Light
- Die-cast aluminium housing with a strong extruded aluminium pole, offering excellent durability and corrosion resistance
- Injection-molded polycarbonate (PC) diffuser for uniform light distribution and high impact resistance
- Injection-molded polycarbonate (PC) diffuser for uniform light distribution and high impact resistance
- Estimated durability 10+ years
| Light Source: | Lumileds 2835 |
| Power: | 10W/20W/25W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 118° |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20635-LED Bollard Light
LED Bollard Light
LD-20635-LED Bollard Light
- Die-cast aluminium housing with a durable extruded aluminium pole, ensuring long-term strength and corrosion resistance
- Tempered glass diffuser for maximum light output and excellent optical clarity
- Perfect for outdoor applications, including parks, public squares, streets, and building exteriors
- Estimated durability 10+ years
| Light Source: | Lumileds 3030 |
| Power: | 10W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 2700K/3000K/4000K/5700K/6000K |
| Input Voltage: | AC110-240V |
| Beam Angle: | 60°/90°/ 120°/T2/T3 |
| Material: | Die-cast aluminium |
| Finishing Color: | Black, Grey |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20611-S-LED Decorative Pole Light
LED Decorative Pole Light
LD-20611-S-LED Decorative Pole Light
- Housing made of stainless steel and aluminium, along with an extruded aluminum pole
- It is equipped with a PMMA diffuser for effective light distribution
- This decorative pole is suitable for applications such as parks, squares, streets, and buildings
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | Lumileds 2835 |
| Power: | 30W/50W/70W |
| Lumen Efficacy: | 150-160lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Stainless Steel & Aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20612-S-LED Decorative Pole Light
LED Decorative Pole Light
LD-20612-S-LED Decorative Pole Light
- The light fixture features a die-cast aluminium housing combined with an extruded aluminium pole for durability and strength
- It is equipped with clear tempered glass, ensuring high transparency and resistance to impact
- The product is suitable for various applications, including parks, public squares, streets, and building exteriors
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | CREE LED Chip |
| Power: | 2x15W/ 2x25W |
| Lumen Efficacy: | 100-110lm |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20613-LED Decorative Pole Light
LED Decorative Pole Light
LD-20613-LED Decorative Pole Light
- The light fixture is constructed with a die-cast aluminium housing, providing durability and long-lasting performance
- It features an injection-molded PC diffuser, ensuring uniform light distribution and high impact resistance
- The product is suitable for applications such as parks, public squares, streets, and building exteriors
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | Lumileds 3030 |
| Power: | 40W/60W/75W/100W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20614-LED Decorative Pole Light
LED Decorative Pole Light
LD-20614-LED Decorative Pole Light
- The light fixture is made with a die-cast aluminium housing for strong and durable performance
- It includes an injection-molded PC diffuser that provides efficient and uniform light distribution
- The product is ideal for use in parks, squares, streets, and building areas
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | Lumileds 3030 |
| Power: | 30W/45W/60W/80W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray,Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20615-LED Decorative Pole Light
LED Decorative Pole Light
LD-20615-LED Decorative Pole Light
- The light fixture features a die-cast aluminium housing for enhanced strength and durability
- It is fitted with a PMMA diffuser, ensuring high light transmission and even illumination
- The product is ideal for applications such as parks, squares, streets, and building exteriors
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | Lumileds 3030 |
| Power: | 25W/35W/45W/60W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20616-LED Decorative Pole Light
LED Decorative Pole Light
LD-20616-LED Decorative Pole Light
- The fixture is made with a durable die-casting aluminium housing, ensuring strength and long-term performance
- It features a PMMA diffuser, providing excellent light transmission and uniform illumination
- This decorative pole is suitable for various outdoor applications, including parks, squares, streets, and building surroundings
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | CREE LED Chip |
| Power: | 20W/30W/45W/60W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20617-LED Decorative Pole Light
LED Decorative Pole Light
LD-20617-LED Decorative Pole Light
- The fixture is made with a durable die-casting aluminium housing, ensuring strength and long-term performance
- It is equipped with a high-quality PMMA diffuser to ensure uniform light distribution
- It is ideal for outdoor applications such as parks, squares, streets, and building surroundings
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | Lumileds 3030 |
| Power: | 25W/35W/60W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20618-LED Decorative Pole Light
LED Decorative Pole Light
LD-20618-LED Decorative Pole Light
- The fixture is constructed with a durable die-casting aluminium housing, ensuring strength and long-lasting performance
- It features an injection-molded PC diffuser that provides efficient and uniform light distribution
- This lighting solution is ideal for applications such as parks, public squares, streets, and building surroundings
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | Lumileds 3030 |
| Power: | 25W/35W/60W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20619-LED Decorative Pole Light
LED Decorative Pole Light
LD-20619-LED Decorative Pole Light
- Manufactured with die-cast aluminum housing and an extruded aluminum pole for strength and durability
- Equipped with clear tempered glass to ensure excellent light clarity and protection
- Suitable for outdoor applications including parks, public squares, streets, and building surroundings
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | CREE LED Chip |
| Power: | 30W/45W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-cast aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20620-LED Decorative Pole Light
LED Decorative Pole Light
LD-20620-LED Decorative Pole Light
- Constructed with a durable stainless steel and aluminium body for long-lasting performance
- Fitted with clear tempered glass for high light transmission and impact resistance
- Ideal for outdoor applications such as parks, public squares, streets, and building surroundings
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | CREE LED Chip |
| Power: | 30W/40W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Stainless Steel & Aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
LD-20621-LED Decorative Pole Light
LED Decorative Pole Light
LD-20621-LED Decorative Pole Light
- The fixture is constructed with a durable die-cast aluminium housing for enhanced strength and longevity
- It is equipped with a high-quality PMMA diffuser to ensure uniform light distribution
- It is suitable for a wide range of outdoor applications, including parks, squares, streets, and building areas
- Control System: On/Off / Dali
- Finish: Electrostatic Powder Coating as per given RAL
- Customization features available for : RAL/ Flange Cover/ Anchor Set/ Service Door Height/ Mounting Bracket/CCT/CRI/Beam Angle/ Diffuser etc
| Light Source: | Lumileds 3030 |
| Power: | 25W/35W/60W |
| Lumen Efficacy: | 100-110lm/W |
| CCT: | 3000K/4000K/5000K/6500K |
| Input Voltage: | AC110-240V |
| Beam Angle: | N/A |
| Material: | Die-Cast Aluminium |
| Finishing Color: | Gray, Black (Customized RAL Color) |
| Driver: | Standard |
| IP Rating: | IP65 |
| Mounting: | Base Mounted |
| Lifespan: | 50,000hrs |
Foot note: For a detailed project data sheet, contact LEDECOR technical support.
